Specna Arms – SA-B06 ONE™ Kestrel™ ETU, Sort

BEMÆRK VENLIGST: LOGOET PÅ KROPPEN ER ET STANDARD SPECNA ARMS LOGO OG IKKE “US MARINES” SOM SES PÅ BILLEDET.

The Kestrel V2 Basic ETU by Eshooter is an advanced ETU system featuring ease of use, durability and functionality. The Kestrel V2 Basic is programmable with trigger pulls, works with both brush and brushless motors in High Speed and High Torque configurations and increases the reliability of the replica and protects internal parts in the event of overload due to motor damage or battery drain.

Functions of the Kestrel Basic system:

-Pre-cocking programmable in 5 stages with piston position learning function.
(function requires a few single shots after connecting the battery for calibration)
-Active Break. The replica performs a full cycle with each shot, so that no unnecessary overloads are created in the GB due to performing part of the cycle.
-Locked Rotor Protection, function protects the inside of the replica in case of damage to the motor
-Battery Drain Protection. Protection against battery discharge. The motor vibrates, the blue LED illuminates five times to indicate battery drain
-Low/ High Voltage Protection. The module detects the number of battery cells and adjusts operation to different numbers of cells and voltages from 6V to 17V.

The SA-B06 airsoft rifle by Specna Arms has been made predominantly from a uniform zinc and aluminium alloy, with the use of steel components at the most critical points of the replica (so all screws, pins and the tactical sling mount are steel). The fixed buttstock and pistol grip are made of polymer polymer. The body of the replica was subjected process of anodisation, which guarantees a high degree of protection of the replica against corrosion. The painting of the replica itself was done powdering process, after the surface had been sandblasted. This method of paint application is known, among others, from G&P replicas and ensures a much higher than usual resistance of the applied paint to abrasion.

The replica has been very well fitted – in a way that has so far been seen almost exclusively in manufacturers of the G&P or Classic Army class – and perfectly balanced. This ensures almost ideal manoeuvrability of the replica, while its weight is also almost imperceptible once the replica is placed against the shoulder.

The replica uses the quick spring change system, the so-called Enter & Convert™. This allows for quick and efficient adjustment of the replica’s power to the conditions expected on the field of play without the need for access to a workshop or a number of specialised tools – after removing the gearbox from the body of the replica, the spring replacement process itself takes literally seconds.

The advantages of the Enter & Convert™ system are difficult to overestimate. In light of the prevailing trend across Europe towards legal limits on replica discharge velocity and the arrangements that exist within the environments themselves, this system guarantees the user considerable capability and a great deal of freedom. The Enter & Convert™ system makes it possible, with a minimum of time, to change the mainspring and thus adapt the replica’s discharge velocity to the playing area so as to guarantee an ideal compromise between the effectiveness of the firearm and the safety of yourself and other players.

The replica has been fully adapted to work with batteries of the types LiPo and LiFe. With a base initial discharge velocity of about ~125 m/s guaranteed by the pre-installed mainspring, the replica is perfectly suited for medium range operations. An M90-type spring is also included, which allows to reduce the initial velocity to ~95 m/s thus making the replica perfectly suited for short-range or indoor operations.

The gearbox, reinforced at the height of the cylinder head, conceals a steel spring guide that is part of the Enter & Convert™ system and set on 8mm ball bearings and washers steel gears. The system is secured with four anti-reverse pawls. It also uses cylinder type 2 and steel cut-off lever. The replica is factory-fitted with an accurate, rotating polymer Hop-Up chamber which allows for very precise and stable adjustment of the BB overclocking system.

Upgraded version has a number of new, reinforced parts such as:

– a set of reinforced, steel gears
– a steel spring guide
– a lightweight, polymer piston
– an aluminium, sealed piston head
– a metal cylinder head
– a sealed, metal nozzle

When the transport grip is removed, we gain access to the 22mm RIS dorsal rail. This allows us to equip the carbine with various types of optical sights. The replica is equipped with metal, adjustable, mechanical sighting instruments. The rechargeable battery is located in the centre of the fixed stock. Thanks to the considerable space available inside, it is possible to use a power source of quite considerable size and therefore significant capacity. The standard flame suppressor is mounted on a 14-mm left-handed thread, which makes it possible to attach a sound suppressor in its place.

To increase the realism of the gameplay, the replica is also equipped with a functioning breech release.

The replica comes with a steel hi-cap magazine, holding 300 rounds. Its colours correspond to those of magazines designed for firearms typically used by the armed forces.

Package include:

• Magazine
• Replica
• M90 additional spring

Package exclude:

• The set does not include the battery nor charger

Tilbehør som passer til geværet:
Vær opmærksom på at der kan være enkelte tilfælde hvor produkterne ikke passer 100% sammen.