Specna Arms – SA-A03 HAL2 ™, Chaos Bronze
The Specna Arms SA-A03 carbine replica is made predominantly from a uniform zinc-aluminium alloy, with the use of steel elements in the most critical points of the replica (so all screws, pins and the tactical suspension handle are steel). The flask as well as the pistol grip are made of polymer plastic.
The replica has been equipped with Specna Arms’ advanced electronic control system HAL2 ™. This is a Polish system in which a magnetic Hall effect-based trigger provides unprecedented sensitivity (up to 500 points), responsive operation, while being insensitive to dirt and external light. HAL^2 Widget works with all standard triggers, so you can choose from the numerous models available on the market and further personalise your replica. The built-in Bluetooth® Low Energy module allows easy and stable connection to your phone, while also ensuring long battery life of the replica on battery power. Simply switch it on and it is immediately possible to configure the settings. On the other hand, a number of sensors ensure trouble-free operation of the replica and prevents it from being damaged – should a problem be detected.
With the free app Specna Link™ Google Play or Specna Link™ App Store you will discover all the possibilities of the HAL2 system ™. This intuitive and glove-friendly tool will allow you to to quickly adjust the parameters of the replica to the requirements of a given shooter. You can create several profiles for one replica – with different settings, or create accounts for several different replicas. Then all you have to do is select the option in the app and you’re ready to play!
All the capabilities of HAL^2 and the Specna Link ™ application:
-. trigger sensitivity adjustment,
-. precocking for faster trigger response,
-. selectable firing mode: SINGLE, BINARY, SERIAL or AUTO and assigning it to the selected selector position,
-. adjustable series length,
-. speed setting,
-. LiPo/LiIon battery protection against over-discharge,
-. magazine mode,
-. continuously displayed battery charge status,
-. saving settings for different game modes,
-. advanced telemetry data, which can be collected in one place and control performance with them,
-. ability to track the status of the replica in real time.
.
The replica has been very well-fitted – in a way that has so far been seen almost exclusively in manufacturers of the G&P or Classic Army class – and perfectly balanced. This ensures almost ideal manoeuvrability of the replica, while its weight is, moreover, after placing the replica at the shoulder almost imperceptible.
The replica uses the quick spring change system, the so-called Enter & Convert™. This allows quick and efficient adjustment of the replica’s power to the conditions expected on the playing field without the need for access to a workshop or a number of specialised tools – after removing the gearbox from the body of the replica, the spring change process itself takes literally seconds.
The replica has been fully adapted to work with batteries of the type LiPo and LiFe. Thanks to the base initial discharge velocity of the order ~410 FPS guaranteed by the factory-installed mainspring, the replica is perfectly suited for medium-distance operations. A M90-type spring is also included, which allows the initial velocity to be reduced to ~310 FPS making the replica perfectly suited for short range or indoor operations.
The gearbox, reinforced at the height of the cylinder head, conceals a steel spring guide that is part of the Enter & Convert™ system and mounted on 8mm ball bearings and washers steel gears. The system is secured by four anti-reverse pawls. It also uses cylinder type 2 and steel interrupter. The replica is factory-installed with an accurate, rotating polymer Hop-Up chamber which allows very precise and stable adjustment of the bullet overclocking system.
– set of reinforced steel gears
– steel spring guide
– lightweight polymer piston
– aluminium sealed piston head
– metal cylinder head
– sealed metal nozzle
The rifle is fitted with a 22mm dorsal RIS rail, a set of front RIS rails and an adjustable buttstock. Metal flip-up sights have been fitted on the upper RIS rail, but these can be freely replaced by any optoelectronic sighting device. Thanks to the sliding buttstock finished with an anti-slip textured footplate, it is possible to adjust the length of the replica to the shooter’s build and preferences. The standard flame suppressor is mounted on a 14-mm left-hand thread, which makes it possible to attach a sound suppressor in its place.
To increase the realism of the gameplay, the replica is also equipped with a functioning breech release.
The replica also comes with a steel hi-cap magazine that holds 300 rounds.
Package include:
- Instruction
- Hi-Cap Magazine
- Replica
- M90 additional spring
The replica is equipped with an advanced electronic control system Specna Arms HAL2 ™. Hall effect-based trigger provides unprecedented sensitivity (up to 500 points), responsive operation, while being insensitive to dirt and external light. Inbuilt-in Bluetooth® Low Energy provides an easy and stable connection to your phone for setup, while ensuring long battery life for the replica. A series of sensors ensures trouble-free operation of the replica and will prevent damage to the replica if a problem is detected.
With the free app Specna Link ™ (Android and IOS version)you will discover all the possibilities of the HAL2 ™ chip. And in it:
– Adjustable trigger sensitivity,
– Selectable shooting mode: SINGLE, BINARY, SERIAL or AUTO and assigning it to the selected selector position,
– adjustment of series length,
– setting of rate of fire,
– LiPo/LiIon battery over-discharge protection,
– Magazine mode,
– Real-time display of battery charge status,
– Settings saved for various game modes,
– Advanced telemetry data
– Ability to track the status of the replica in real-time,